Migliaccio & Rathod LLP is investigating reports that certain Quickie QS5 X wheelchairs may experience cracking or structural failures around the front caster and frame area during ordinary use.
The QS5 X is a lightweight folding wheelchair designed for active everyday use. Consumers purchasing a premium manual wheelchair may reasonably expect its frame, caster mounts, and other load-bearing components to withstand the repeated stresses of normal mobility.
However, reports involving the Quickie QS5 X raise concerns about cracking, breakage, or other structural problems around the caster assembly and surrounding portions of the wheelchair frame.
Consumers Report:
- cracks developing around the front caster area;
- caster forks, mounts, or nearby structural components becoming loose or damaged;
- front-frame components cracking during ordinary use;
- repeated problems involving the same area of the wheelchair;
- instability or changes in handling after the problem develops; and
- needing replacement parts or substantial repairs to continue safely using the chair.
A crack or failure near a wheelchair’s caster can be particularly concerning because the front casters help the user steer, maintain stability, and travel over everyday surfaces.
Migliaccio & Rathod is investigating whether affected Quickie QS5 X wheelchairs share a common problem involving the design, strength, or durability of their caster or front-frame components and whether consumers experiencing these failures received an adequate repair.
Potential Claims May Include:
- defective design;
- defective structural components;
- manufacturing defects;
- breach of express or implied warranty;
- failure to adequately disclose a recurring durability problem; and
- unfair or deceptive trade practices.
Signs You May Be Affected:
- You own or previously owned a Quickie QS5 X wheelchair;
- your chair developed a crack near a front caster or caster mount;
- a caster fork, mount, or nearby frame component broke or became unstable;
- the problem occurred during normal use rather than a major collision or accident;
- you needed replacement structural or caster components; or
- you stopped using the wheelchair because you were concerned about the safety of the front frame or caster assembly.
If you have encountered these issues, we would like to hear from you. Please complete the contact form on this page, send us an email at [email protected], or give us a call.